FEATURES OF PRODUCT
- Quick tire patching, no need to remove the wheel: Saves time and effort
- Modern technology: Uses specialized glue with high durability, does not damage the tire structure, increases safety and prolongs the life of the tire.
- Compact design, convenient to carry and easy to store, very suitable for long trips or in emergency situations.
- Easy to use even for non-professionals: The tire patching process is simple, does not require complicated techniques, helping users confidently repair without going to a garage or professional.
Instructions for use
1. Mark the tire repair position and puncture.
2. Use the spiral cone to determine the direction of the wound, apply glue to the front end of the spiral cone, insert it into the wound position, repeat the insertion and withdrawal three times or more to make the wound filled with vulcanized agent (Figure 1)
3. Insert the tire repair strip into the front port of the tire repair needle, with half in the state (Figure 2). Coat both sides of the vulcanized rubber strip with glue. 3)
4. Pull out slowly, then stop when the rubber strip is pulled out 1 cm, so that there are 4 rubber strips in the hole (Figure 4)
5. Use a knife to cut the rubber strip, leaving 2 mm above the tire surface (Figure 5)
6. Test with water. If there is air leakage, press the 3 and 4 keys to create another patch along the edge.